Redline Roofing
4.9 · Google(37 reviews)Fully InsuredFamily-Owned · North Salt Lake
Roy · Weber County, UT

Metal Roofing and Sheetmetal in Roy, UT

Standing-seam metal roofing and custom architectural sheetmetal across Davis, Salt Lake and Weber counties: snow-shedding, wind-rated, energy-efficient roofs with a 50-year lifespan, fabricated and installed by Redline. Free inspection, a written estimate you can read, and a straight answer on what your roof actually needs.

Who's this inspection for?

Takes about 60 seconds. Free inspection, no obligation.

  • Standing seam · 50-year roofs
  • Licensed & insured
  • Free inspection
Metal Roofing and Sheetmetal in Roy, UT

Local context

Metal Roofing and Sheetmetal in Roy — what's different here.

Roy sits in the Weber County part of the metro, where storms arriving from the southwest, Wasatch foothills wind, and I-15 corridor heat shape every roof. Homes here run to 2000s-and-newer subdivisions in Roy and South Ogden, university rentals and a historic downtown in Ogden, and larger bench lots in North Ogden, and HOA rules apply in the newer subdivisions, Ogden has its own historic-district review, and landlords near Weber State usually want a fast documented repair first.

Roy is the flat west of Hill Air Force Base along 1900 West and 5600 South, and most of its housing is 1960s-to-90s ramblers and split-levels with roofs on their second or third shingle. Without the bench to break it, wind crosses these open streets with real force, and a lot of Roy replacements start as a wind claim after a storm lifts tabs across a whole block. Newer subdivisions on the edges are reaching first replacement together, usually under HOA color rules. Roy issues its own permits, and Redline documents wind damage slope by slope so the claim is decided on complete evidence.

North Ogden is where metal roofing questions come up most: larger bench lots, ranch-style homes, exposed ridges, and outbuildings quoted alongside the house. Standing seam handles the wind and hail and runs cooler through the summer.

What it looks like in practice:

  • Sheds snow, no more ice dams or snow load worries
  • Wind-rated for the bench; will not break, wear out or need replacing
  • Reflects high-altitude sun, lower cooling bills
  • Custom-bent sheetmetal for a finish that stands out

What we do in Roy

Metal Roofing and Sheetmetal scope on Roy homes

Every metal roofing and sheetmetal job we do in Roy pulls from this scope. Most projects combine two or three of the items below.

Standing-Seam Metal Roof Installation

Custom Architectural Sheetmetal

Metal Flashing, Trim & Parapet Caps

Metal Roof Repair & Resealing

Fastener & Seam Resealing

Snow Retention Systems

Shingle-to-Metal Conversion

Outbuilding, Shop & Cabin Metal Roofs

Looking for the full overview? See the main metal roofing and sheetmetal page for process, photos, and pricing breakdowns.

Our process

How metal roofing and sheetmetal works on a Roy home

Clear, documented, and accountable from the first inspection to the final walk-through.

  1. 1

    Request a Bid

    Call, text, or fill out the request form and we call you back. Once we have the basics — the address and what is going on with the roof — we move to step two.

  2. 2

    We Send an Estimator

    Our estimator maps your roof from the air and verifies it with physical measurements on-site. That is how the bid becomes the most accurate number you will get — free, in writing, with the material options explained. We talk through profile, gauge, finish and color, and tell you honestly whether metal or a quality shingle is the better value for your home.

  3. 3

    Schedule a Time

    We do all we can to accommodate your schedule: you pick from the dates we have open, materials are delivered ahead of the crew, and the start date holds.

  4. 4

    The Job Gets Done

    Panels and custom sheetmetal fabricated to your roof's measurements, installed with concealed fasteners and sealed seams, snow retention where the geometry needs it, cleanup every day, and a final walkthrough.

Roy questions

Metal Roofing and Sheetmetal in Roy — frequently asked

Common questions Roy homeowners ask us about metal roofing and sheetmetal. Don't see yours? Call or text.

11 of 11 questions

More we do here

Other services we offer in Roy

Roof and gutters often get scoped together after a storm — one inspection, one claim file, one crew.

Free Inspection · Free Bid · No Obligation

Ready for a free Roy metal roofing and sheetmetal estimate?

Free on-site inspection, written estimate, no pressure. Typical range: Standing seam · 50-year roofs.

  • Aerial map verified with physical measurements — the most accurate bid around
  • Repair first: if a few shingles will do, we'll say so
  • On an approved claim your cost is usually your deductible
Prefer to talk?(385) 427-8169

Who's this inspection for?

Takes about 60 seconds. Free inspection, no obligation.

Free inspection

We walk the roof, photograph what we find, and put it in writing. No charge.

Licensed & insured

Insured on across Northern Utah. Certificates on request.

Insurance-claim specialists

We document damage the way adjusters expect and tell you why claims get denied.

CallText

Frontend Horizon × Redline Roofing

Pay for leads and sold roofs, not for ads.

Two ways to pay for this website for Redline Roofing. A small flat fee keeps the site running. After that you only pay when a real homeowner contacts you through the site, and a small cut when a roof from one of those leads gets sold: 3.5% on the Monthly plan, 2.5% on the Annual plan. Click a plan below, then move the sliders to your own numbers to see what you would pay and what you would bring in.

Pay as you go

Monthly

$400

per month

  • $150 for each real lead — a local homeowner asking about roof work
  • 3.5% of each roof sold from those leads
  • This website, built, launched and kept online
  • Every call and form counted, so you see exactly what you pay for
Click here to start Monthly — $400/mo
Best value

Two months free

Annual

$4,000

per year — about $333 a month

  • $100 for each real lead
  • 2.5% of each roof sold from those leads
  • Everything in Monthly
  • Two months free compared with paying month to month
Click here to start Annual — $4,000/yr

Try your own numbers

What you would pay, and what you would bring in

Move the three sliders to match your business: how many homeowner leads you get in a month, how many of those turn into a sold roof, and what a typical roof pays you. The numbers below only count roofs sold from these leads.

20 leads a month, 25% of them sold → 5 roofs sold, worth $60,000 this month on the Monthly plan.

You pay this month

$5,500

$400 base flat + $3,000 for leads + $2,100 on roofs sold (3.5%)

Roof sales from those leads

$60,000

5 roofs × $12,000

Back for every $1 you pay

$10.91

10.9 times what you pay, in roof sales

What each sold roof costs you

$1,100

all in — flat fee, lead fees and the 3.5% cut

Keep this up for a year: you pay $66,000 and sell $720,000 in roofs.

Ready to go with the Monthly plan?

Click the button to pay the flat fee by card. Leads and sold roofs are billed as they happen.

Click here to start Monthly — $400/mo

The cut on a sold roof (3.5% Monthly, 2.5% Annual) comes off the price of that roof, and only when the job came from a lead this website brought you. A lead only counts when it is a homeowner in your area who wants roof work and reaches you through the site's tracked phone number or form — that is what the call and form counting is for.